To Next Page

To Previous Page

Initial Setup

14 ColorQube 9301/9302/9303 Multifunction Printer

System Administrator Guide

Physically Connecting the Printer

1. Connect the power cord to the printer, and plug it into an electrical outlet.

2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the back of the

printer. Connect the other end of the cable to a correctly configured network port.

3. If your printer has fax installed, connect it to a correctly configured telephone line.

4. Turn on the printer.

Xerox ColorQube 9301 System Administrator Guide

Other manuals for Xerox ColorQube 9301