Security
ColorQube 9301/9302/9303 Multifunction Printer 93
System Administrator Guide
System Timeout
You can specify how long the printer waits to log out an inactive user at the control panel.
Setting System Timeout Values
1. In CentreWare Internet Services, click Properties > Security.
2. Click System Timeout.
3. Under Web System Timer, type the inactive time from 6–6000 minutes, that the printer waits before
it logs a user out of CentreWare Internet Services.
4. Under Touch User Interface System Timer, type the time that the printer waits before it logs a user
out of the touch screen. Type the time, from 0–60 minutes, and select the time in seconds.
5. Under Warning Screen, select Enabled to require the printer to display a warning message before it
logs a user out of the touch screen.
6. Click Apply to save the new settings or Undo to retain the previous settings.
To Next Page
Loading...
Need help?
General
