Customization and Expansion
ColorQube 9301/9302/9303 Multifunction Printer 187
System Administrator Guide
Auxiliary Interface Kit
An Auxiliary Interface Kit, or a Foreign Device Interface kit, is a third-party access and accounting device.
These kits, such as a coin operated printer accessory or a card reader, can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit. After the kit is installed,
enable Auxiliary Access at the control panel.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Accounting Settings.
3. Touch Accounting Mode > Auxiliary Access.
4. Touch Auxiliary Device Type and select your printer type.
5. Touch Save twice.
See also:
Accounting on page 157
Local Authentication on page 59
To Next Page
Loading...
Need help?
General
