Network Configuration
ColorQube 9301/9302/9303 Multifunction Printer 41
System Administrator Guide
SMB Filing
You can specify Kerberos authentication options for features that file images to an SMB-shared network
location.
Configuring Kerberos Authentication Options for SMB
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Under With Kerberos Tickets, for Workflow Scanning, Server Fax, and Scan to Home features, select
an option:
Always File with Kerberos Ticket: The printer only attempts to use Kerberos authentication to
the SMB shared network location. Configure Network Authentication or Smart Card
Authentication using a Kerberos server.
Prefer Filing with Kerberos Ticket: The printer authenticates to the SMB shared network
location with a Kerberos ticket if available. If a Kerberos ticket is not available, or Kerberos
authentication fails, the printer attempts to authenticate using other methods, such as NT, or
NTLM.
Do Not File with Kerberos Ticket: The printer attempts to authenticate to the SMB shared
network location using other methods, such as NT, or NTLM. Do not select this option when
Smart Card authentication is enabled. If you select this option when Smart Card authentication
is enabled, SMB file transmission fails, and an error message appears on the touch screen.
3. Under WIthout Kerberos Tickets, features that use SMB, but cannot use Kerberos authentication are
listed. Click the link under the feature name to navigate to the configuration page for that feature.
Disable these features or configure them to use a protocol other than SMB for FIPS 140 compliance.
4. Click Apply.
To Next Page
Loading...
Need help?
General
