The time From Last Operation to Low Power mode must not exceed the time From
Last Operation to Sleep Mode.
b) From Last Operation to Sleep Mode: Set the time to go from last operation to
sleep mode from 1 through 240 minutes, in 1 minute increments.
Time Zone
1. From the Machine and Clock/Timers window, select Time Zone and then select
Change Settings.
2. Use the arrows to set the time difference from Greenwich Mean Time (GMT).
3. Select Save to save the settings and return to the previous window.
Daylight Savings
With this feature enabled, the machine automatically adjusts the current time when
daylight savings time starts and ends.
Print-On-Demand Duration
1. From the Machine Clock/Timers section, select Print-On-Demand-Duration.
2. Select the desired minutes.
Audio Tones
Use the Audio Tones feature to select whether or not to sound an alarm for various
machine functions; for example an alarm can be set to sound when a job ends or there
is a fault. Options include:
Control Panel Select Tone
Select the volume level that sounds when a button on the UI is correctly selected. Select
from Loud, Normal, and Soft. To disable the sound, select Off.
Control Panel Alert Tone
Select the volume level that sounds when a non-functioning (or grayed-out) button is
selected or when an error occurs. Select from Loud, Normal, and Soft. To disable the
sound, select Off.
Base Tone
For a button that toggles (the setting changes each time it is pressed), select the volume
level that sounds when the button is in its initial (first) position. This is the sound made
when the Interrupt button is released. Select from Loud, Normal, and Soft. To disable
the sound, select Off.
Machine Ready Tone
Set the volume level that sounds when the machine is ready to copy or print or after
the machine powers on. Select from Loud, Normal, and Soft. To disable the sound,
select Off.
10-7Xerox
®
D95/D110/D125/D136 Copier/Printer
System Administration Guide
System Settings
To Next Page
Loading...
Need help?
General