DocuMate 162 Scanner User’s Guide 29
Scanning
The Page Settings Tab
1. Click the Page Settings tab to select page options.
Standard—Click the menu arrow and choose a page size from the
list.
Custom—Enter the horizontal and vertical page dimensions in the
boxes. Click the name of the units, inches or millimeters, to toggle
between them.
Improvements and Settings—One the options that apply to the
selected scanning mode on the Scan Settings tab are available.
• AutoCrop to Original—Select this option to let the scanner
automatically determine the size of the item being scanned.
Always use the paper guides on the scanner so the page is not
skewed. Skewed pages may not crop properly.
• Reduce Moire Patterns—Moire patterns are wavy, rippled lines
that sometimes appear on the scanned images of photographs or
illustrations, particularly newspaper and magazine illustrations.
Selecting Reduce Moire Patterns will limit or eliminate moire
patterns in the scanned image. This option is only available for
the Grayscale or Color Mode lower resolutions.
• Straighten Image—Select this option to let the scanner
automatically determine if a page is skewed, then straighten its
image. If the page is fed through at too great an angle, the image
may not scan correctly. In that case, re-scan the page using the
paper guides to feed the paper in straight.
Click to toggle
between inches
and millimeters.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
