Scanning
30 DocuMate 162 Scanner User’s Guide
• Invert Image—Only available for Black&White Mode, this option
reverses the black and whites of an image.
• Duplex—Scan both sides of the page. If this option is not
selected, the scanner will scan the face-down side of the page
only.
• Skip Blank Originals—Skips pages that are completely blank.
Typically you use this option when you will scan a stack of two-
sided pages which have a number of blank sides. This option is
only available for Duplex scanning.
• Color Filter—Color filter is the ability of your scanner to
automatically remove a color from a scanned item. Color filter
applies to Black&White or Grayscale Mode.
2. Click on Apply to save the changes on the Page Settings tab.
3. If there are no other settings you want to change, click OK to save the
new configuration.
It will now be in the list of Scan Configurations on the One Touch
Properties window for the appropriate Destination Applications.
NOTE: The Simplex and Duplex buttons on the scanner take
precedence over the One Touch settings. In other words, if the LED
number on the scanner is configured to scan as Duplex, but you press
the Simplex button, the scanner scans in Simplex, and vice versa.
Original Image Inverted Image
The original with a red
watermark over black text.
The scanned item with the
red filtered out.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
