DocuMate 250 Scanner User’s Guide 47
Scanning
Creating a New Scan Configuration
The scan configurations are where you select the scanning
resolution, brightness, mode (color, black&white, or grayscale),
and a number of other settings.
Note the lock icon on the preset configurations. Although you can
unlock and edit the preset configurations, we recommend that you
leave them locked, and only add new configurations. That way, you
will always have the original factory-set configurations available.
To create a new configuration:
1. Open the One Touch Properties window and make sure the
Scan tab is selected.
2. Scroll through the applications in the Select Destination list and
click the type of application for which you want to create a new
scan configuration.
When you create a new scan configuration, it will appear for the
same types of Destination Applications. For example, if you
create a new configuration for image editor applications, that
new configuration also appears for any other image editors, but
not for text editing applications. Thus, you can create specific
sets of scan configurations for specific functions and they
appear only when appropriate.
3. Click the New button.
If you want to start from the settings of another configuration,
select the configuration, then click the Copy button.
The Scan Configuration Properties dialog box opens.
If the Scan Settings tab is not selected, click it.
The Scan Configurations.
The Lock Icon.
Click New to create a
new Scan Configuration.
To Next Page
Loading...
Need help?
General