Xerox DocuMate 250 - Checking the Hardware and Setting the Lamp Power Save Mode

DocuMate 250 Scanner User’s Guide 79
Scanning
Checking the Hardware and Setting the Lamp Power Save Mode
1. Right-click on the One Touch icon and choose Show
Hardware from the pop-up menu.
2. You can also click the scanner icon at the top of the One Touch
Button Panel.
If this view of the panel is open you can also right-click on the
DM 250 icon.
The Hardware Properties dialog box opens and shows
information about your Xerox DocuMate 250 scanner.
The Hardware icon.