Xerox DocuMate 250 User Manual

DocuMate 250 Scanner User’s Guide 85
Scanning with the TWAIN Interface from PaperPort
Scanning with the TWAIN Interface
The TWAIN interface lists the scanning options available with
your Xerox DocuMate 250 scanner.
The options on the TWAIN interface are:
• Mode—Select a scanning mode:
Black&White to scan in black and white. The scanning
pixels are all the same size and are either black or white.
Use this setting for letters, memos, and other black and
white material. This scan mode produces the smallest file
size.
GreyScale to scan items such as documents containing
drawings or black and white photographs. The scanning
produces an image of up to 256 shades of gray. You can
also scan a color document to turn its colors into gray
shades. The file size is about one third that of a color scan.
Color to scan magazine articles, photographs, and other
color images in full color. Color scans have the largest file
size.
• Resolution—Drag the slider to the right or left to adjust the
dots per inch (dpi) of the resolution. The maximum
resolution is 600 dpi; the minimum is 50 dpi. This option
determines the amount of detail you can see in the scanned
image. The higher the dpi setting, the sharper and clearer
the scanned image. However, higher dpi settings take
longer to scan and produce larger files for the scanned
images. Usually the higher resolution settings are used for
precision work, such as photographs or fine artwork.

Xerox DocuMate 250 Specifications

General

Brand	Xerox
Model	DocuMate 250
Category	Scanner
Language	English