DocuMate 250 Scanner User’s Guide 57
Scanning
4. Click OK. The One Touch Properties window closes.
The One Touch panel will show the name of the configuration.
5. Insert the first set of documents that you want to scan to
storage.
6. Press the Scan button on the scanner or click the Scan icon on
the panel.
The documents are scanned to the folder specified for the
configuration.
7. When scanning is finished, open the One Touch Properties
window again and select the other configuration you created for
storage.
8. Click OK or Apply.
The One Touch panel will show the name of the other
configuration.
9. Now, scan the next set of documents.
When scanning is finished, the two sets of documents are stored in
the two separate folders.
To Next Page
Loading...
