Xerox DocuMate 3220 User Manual

Xerox
®
DocuMate
®
3220
User’s Guide
115
The options on the Page Settings tab, in the Scan Configuration Properties window will affect the job
separation options as described below:
Skip blank originals
• The Sensitivity you set for this feature is the one that is used when scanning. The sensitivity level
you set in the Options tab will be ignored.
• When you are scanning in Simplex mode and the selected job separator is
When a blank page is
detected
, the job separation occurs first and a new file will be created each time a blank page is
detected. If you want a single file created with the blank page discarded, deselect the job
separation feature on the Options tab.
Note that when scanning Duplex, both sides of the page must be blank for the job separation to
occur. If both sides of a scanned page are blank, the job separation occurs first and a new file will
be created each time a blank page is detected. If you want a single file created with the blank
page discarded, deselect the job separation feature on the Options tab or remove the blank page
from your scanning batch.
• If you select
When the number of images reaches, and input a number in the control box, any blank
pages will be discarded first, and then the number of images scanned will be counted. For
example, if you scan 12 pages and 3 are blank, the total number of images counted for the job
separation will be 9 not 12.

Xerox DocuMate 3220 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	222 x 965 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	23 ppm
ADF scan speed (color, A4)	13 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	46 ipm
Duplex ADF scan speed (color, A4)	26 ipm
Scanner type	Flatbed & ADF scanner
Product color	Gray
Sensor type	CIS
Scan drivers	TWAIN, WIA
Daily duty cycle (max)	1500 pages
Auto document feeder (ADF) input capacity	65 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	512 MB
Minimum storage drive space	350 MB
Bundled software	Visioneer OneTouch\\r Nuance PaperPort\\r Nuance OmniPage Pro
Sustainability certificates	ENERGY STAR
Certification	RoHS
Maximum ISO A-series paper size	A4
Power supply type	-
Package depth	592.07 mm
Package width	400.04 mm
Package height	284.98 mm
Package weight	6708 g
Compatibility	Xerox DocuMate Scanners
Country of origin	China

Weight and Dimensions

Depth	452 mm
Width	323 mm
Height	124 mm
Weight	3800 g