Xerox DocuMate 3460
User’s Guide
42
• Current—Select this option to have the auto scanning event always use the scanning
function that is currently selected on the scanner’s display. For instance, if the LED on the
scanner is set to 6, then the scanner will auto scan from the front feed with the settings of
function 6.
5. Click on OK to apply your changes and close the Device Configuration window.
6. Click on OK to close the Hardware Properties window.
To Auto Scan from the Front Feed Tray:
1. Adjust the paper guides for the width of the item you are scanning.
2. Place a single item face up, with the top pointing into the scanner, between the paper guides on
the front feed tray.
To Next Page
Loading...
Need help?
General