Xerox DocuMate 3460
User’s Guide
44
Scanning Interfaces
If you selected the recommended installation, then you have several different options to scan with
your Xerox DocuMate 3460 scanner. Each method scans equally well, so use the one with appropriate
options for the item you are scanning.
• One Touch—When you press the Simplex or Duplex button on the scanner, the scanner starts
scanning using the settings for the current LED number. The scanned image is then sent to a
destination on your computer or network drive. See Scanning From One Touch on page 47.
• One Touch Button Panel—Use this scan option when you want to scan from the computer
screen. Scanning from the on-screen One Touch Button Panel is the same as selecting a scanning
option on the scanner, except you click an icon that represents the function. See Scan from the
One Touch Button Panel on page 49.
• TWAIN Interface—This option uses your scanner’s TWAIN interface to scan. Select scanning
options before scanning, put the document in the scanner, then click the Scan button in the
TWAIN interface window. See Scanning from TWAIN on page 137.
To Next Page
Loading...
Need help?
General