Xerox DocuMate 3460

Xerox DocuMate 3460
User’s Guide
32
Scanning from the Automatic Document Feeder
(ADF)
1. Prepare the pages before loading them into the scanner, this helps to prevent multiple-page
feeding and paper jams.
• If the edges of the paper are curled or folded, flatten them as much as possible.
• Fan the edges of the paper to make sure none of the pages are stuck together.
When you press either the Simplex or Duplex button, documents are scanned using the scan
settings indicated by the LED number. The scanned image(s) are then sent to a software
application, computer folder location, or to a network drive.
2. Adjust the paper guide for the width of paper, and make sure the input and output trays are fully
extended.