Xerox
®
DocuMate
®
5445 / 5460
User’s Guide
143
When you scan, any settings you adjusted are automatically saved to the Last used settings preset. These settings
are not retained in a preset until you click Save in the main interface to save the settings to the current preset, or
save them to a new preset using the Save as dialogue. If you select a different preset from the Presets list before
scanning, the changes you made will be discarded.
Scan Regions
You can use the preview window to create custom scan regions for the scanner to use for scanning. For example, if
you want to scan only a specific area of the image, you can move and resize a scan region to focus only on the area
you want to scan. The final image will be only the size of the region you set.
Important: do not change the page size for the scanned image after you create custom regions. When you have set
a custom region in the preview window, the page size field will display “user defined” indicating you have specified
one or more custom regions for scanning. Changing the page size after you create a custom region discards the
custom regions and sets a single scan region to the size you selected in the page size list.
Creating custom scan regions:
1. Select the preset you want to use for scanning.
2. In the main interface click Preview to open the preview window.
If no previous custom scan regions have been created for the preset you selected, the preview window will
have a single scan region that is the page size for the current preset. This region will be labeled number 1 and
be displayed as an outline in the preview area.
3. Place an item in the scanner and then click Get preview.
4. The scanner scans and displays a sample image.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
