Xerox DocuMate 5460 User Manual

Xerox
®
DocuMate
®
5445 / 5460
User’s Guide
196
• Preset overrides capabilities—some scanning applications have the option to adjust the scan settings and
scan without opening this scanner interface. The next time this interface opens, the last used settings will
match the application settings that were used to scan. Select this option to have the settings reset to the last
ones used when this interface was open.
• Enable user compression—this option is enabled only if the scanner and the software allow manual
adjustment of the image compression.
• Remember compression—when a compression option is available for user adjustment, it cannot be saved as
part of a preset. Select this option to have the compression setting saved.
WIA Driver
• Use default WIA UI—select this option to display the Microsoft WIA interface instead of the TWAIN
interface in WIA 2.0 applications.
• Emulate WIA 1.0—select this option to display the TWAIN interface for WIA 1.0 compatible applications.
When this option is selected, WIA 2.0 applications will use the Microsoft WIA interface.
HW IP Settings
The options in this panel are for disabling or enabling the scanner’s hardware image processing (HW IP) options.
Only advanced users should modify any of the options in this section. Options that are not available for your
scanner will be grayed out and disabled.
Click the check box to deselect (disable) hardware image processing only for the option listed. When one of the
options in this window is not selected, software Visioneer Acuity will be used to perform that function while
scanning.
Note: if Visioneer Acuity is not enabled, the function(s) will be disabled in the TWAIN interface until Visioneer Acuity
is turned on or you the select the option in this window.
The options in this window are not available for all scanner models. Please refer to Checking the Scanner Firmware
Version and Checking the Scanner Firmware Version for information on the options available in hardware for your
scanner.

Xerox DocuMate 5460 Specifications

General

Film scanning	-
Color scanning	Yes
Maximum scan size	318 x 210 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	60 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	120 ipm
Scanner type	ADF scanner
Product color	Blue, White
Scan to	Cloud, E-mail, File
Sensor type	CIS
Scan drivers	ISIS, TWAIN, WIA
Daily duty cycle (max)	6000 pages
Auto document feeder (ADF) input capacity	75 sheets
Maximum scan area (ADF)	216 x 4953 mm
Minimum scan area (ADF)	48 x 71 mm
Auto Document Feeder (ADF) media weight	19 - 206 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Input voltage	110-240 V
Power supply type	AC
Power consumption (standby)	1 W
Power consumption (typical)	25 W
Minimum RAM	2048 MB
Minimum processor	Pentium 4
Minimum storage drive space	350 MB
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 2000 Professional, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Cables included	AC, USB

Weight and Dimensions

Depth	208 mm
Width	318 mm
Height	196 mm
Weight	4000 g