Xerox DocuMate 5460

Xerox
®
DocuMate
®
5445 / 5460
User’s Guide
48
Scanning Interfaces
If you selected the recommended installation, then you have several different options to scan with your Xerox
DocuMate 5445 / 5460 scanner. Each method scans equally well, so use the one with appropriate options for the
item you are scanning.
• One Touch—When you press the Start button on the scanner, the scanner starts scanning using the settings
for the current LED number. The scanned image is then sent to a destination on your computer or network
drive.
• One Touch Button Panel—Use this scan option when you want to scan from the computer screen. Scanning
from the on-screen One Touch Button Panel is the same as selecting a scanning option on the scanner, except
you click an icon that represents the function.
• TWAIN Interface—This option uses your scanner’s TWAIN interface to scan. Select scanning options before
scanning, put the document in the scanner, then click the Scan button in the TWAIN interface window.
• ISIS Interface—This option uses the ISIS interface for scanning. Select the ISIS scan settings, put the
document in the scanner, then click the Preview Scan button in the ISIS window.