Xerox
®
DocuMate
®
5445 / 5460
User’s Guide
214
Main Screen Options
This section briefly describes the options on the main interface of the User Utility. The following sections contain
detailed instructions on using some of the options in this utility.
Scanner Status—this area displays the status of the scanner connected as well as error code details.
Error Code—this field displays an error code number to help you diagnosis and resolve hardware errors. Please see
Scanner Error Codes on page 215 for the full list of error codes and steps to resolve the issue.
Scanner Information—this area displays the current hardware specifications of the scanner.
• Model: the scanner hardware model.
• Firmware Version: the scanner’s current firmware version.
• Memory: the amount of memory currently installed on the scanner.
• Interface: the connection interface to the computer.
Scanner Condition—the options in this section relate to software settings and maintenance for the scanner.
• Sleep Mode: clicking on this button opens a window for you to set the time frame for your scanner to go into
power saving mode. Please see Setting Sleep Mode on page 217 for instructions.
• Vertical Line Reduction: clicking on this button initiates the vertical line adjustment utility. Please see Vertical
Line Reduction on page 218 for instructions.
• Caution Setting: clicking this button opens a window for you to set when to receive a notice that it is time to
clean the rollers.
Scanner Counter—this section shows the number of pages scanned. Use the options in this window to keep track of
maintenance performed on the scanner.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
