About this printer
2 - 18
2
2 Sided Printing
The supplied print drivers for Windows
®
95/98/Me, Windows NT
®
4.0 and Windows
®
2000/XP all allow 2
sided printing. For more information about how to choose the settings, see the Help text in the print driver.
Guidelines for printing on both sides of the paper
If the paper is thin, it may wrinkle.
If paper is curled, straighten it and then put it back in the paper tray or the manual feed slot.
If the paper is not feeding properly, it may be curled. Remove the paper and straighten it.
When you use the 2 sided print function, it is possible that there may be paper jams or poor print quality.
If there is a paper jam, see Paper jams and how to clear them on page 6-5.
Printing on both sides of the paper (2 sided printing)
Note
You should use plain paper and recycled paper. Do not use bond paper.
2 Sided printing from the paper tray
1 From the Advanced tab choose the 2 Sided Print mode, and from the Basic tab choose the Paper
Source to be Auto or Tray 1.
2 The printer will automatically print all the even-numbered pages on one side of the paper first.
3 Remove the printed even-numbered pages from the output tray and put them back in the paper tray,
placing the paper with the side that is going to be printed on (blank side) face down. Follow the
instructions on the computer screen.
To Next Page
Loading...
