Control panel
4 - 2
4
LED Printer status
Power-off
The power switch is off.
Sleep mode
The printer is in Sleep mode. Pressing the Go button wakes up the printer from
Sleep mode to Ready mode.
Ready to print
The printer is ready to print.
Warming up
The printer is warming up.
Receiving data
The printer is either receiving data from the computer, processing data in
memory or printing the data.
Data remaining in memory
Print data is left in the printer memory. If the Ready LED blinks for a long time
and nothing has printed, press the Go button to print the data that is still in
memory.
To Next Page
Loading...
Need help?
General