Control panel
4 - 4
4
Front cover open
Close the front cover of the printer.
Back cover open
Close the back cover of the printer.
Paper jam
Clear the paper jam. See Paper jams and how to clear them on page 6-5.
If the printer does not start printing, press the Go button.
No paper manual feed
Put the paper in the manual feed slot. See Printing on plain paper, bond paper
or transparencies from the manual feed slot on page 2-11 or Printing on
heavyweight paper, labels and envelopes from the manual feed slot on page
2-14.
Memory full
The printer memory is full and the printer cannot print full pages of a document.
See Solving print problems on page 6-15.
Print overrun
A print overrun occurred and the printer cannot print full pages of a document.
See Solving print problems on page 6-15.
Dust on drum
The corona wire needs to be cleaned. See Cleaning the corona wire on page
5-14.
LED Printer status
To Next Page
Loading...
Need help?
General