Routine maintenance
5 - 15
5
3 Clean the primary corona wire inside the drum unit by
gently sliding the blue tab from right to left and left to right
several times. Return the tab to the home position ()
before you put the drum unit back in the printer. If you do
not, printed pages may have a vertical stripe.
4 Put the drum unit and toner cartridge assembly back in
the printer. Close the front cover of the printer.
IMPORTANT
• We recommend that you place the drum unit
and toner cartridge assembly on a piece of
disposable paper or cloth in case you
accidentally spill or scatter toner.
• To prevent damage to the printer from static
electricity, do not touch the electrodes shown in
the illustrations.
IMPORTANT
When installing the assembly, hold its grip.
Home position ()
To Next Page
Loading...
