User Guide 4-1
4. Installation
1. Insert the installation disc into your computer’s DVD-ROM drive.
2. Double-click the disc icon that appears on the desktop.
3. Double-click the Setup file to start the driver installer.
4. The Select Language window opens. Click the drop-down menu arrow and select the
language to use. Click OK.
The disc’s Main menu window opens.
Note: If the disc does not start, check the following:
– Make sure the disc drives door is completely shut.
– Make sure the disc was inserted in the drive in the proper direction (label side up).
5. A prompt will be shown to allow the installer to search online for software updates. Select No
to install the software on the disc only.
To Next Page
Loading...
