Xerox Phaser 3020

June 2014
6-15
Xerox® Phaser® 3020 Printer Service Manual
GP 8
General Procedures and Information
GP 8 Software ServiceTools
Purpose
Use this procedure access and download the software service tools.
Procedure
1. To access the software tools file go to:
• GSN Library #7387
• https://www.xrxgsn.com/secure/main.pl?catid=13991
• Software_tools.zip
2. Download the Software_tools.zip file onto the PWS.
3. Open the zip folder and extract the tool files.
4. The WorkCentre® 3020 uses the following tools:
• SWUPGRADE_ON.prn - to enable the machine to accept software downloads
• usblist2.exe - to download software via USB connection.
• USB Serial Number Writing Tool - to write the machine serial number to the Main
PWB.
• EDC tool - to enter Diagnostic Mode