Xerox Phaser 3020

June 2014
4-19
Xerox® Phaser® 3020 Printer Service Manual
REP 1.13
Repairs
REP 1.13 Transfer Roll
Parts List on PL 3.1
Removal
1. Switch Off the Printer and unplug the Power Cord.
2. Remove the Print Cartridge.
3. Remove the Fuser Module (REP 1.14).
4. From the rear of the printer, using a small screwdriver release the latches (2) and push
the Transfer Roll Bushing into the printer (Figure 1).
Figure 1 Transfer Roll Bushing Latches (Rear View)
5. Lift the Transfer Roll out of the printer (Figure 2).
Figure 2 Transfer Roll Removal (Top View)
Latches
Transfer Roll