June 2014
1
Xerox® Phaser® 3020 Printer Service Manual
Xerox® Phaser® 3020 Printer Service Manual
Service Documentation
Xerox® Phaser® 3020 Printer Service Manual
702P02829
June 2014
Prepared by:
Content Development and Language Services - North America
800 Phillips Road - Building 218-01A
Webster, New York 14580-9791
ISO9001 and ISO27001 Certified
©2014 Xerox Corporation. All rights reserved. Xerox®, Xerox and Design®, and Xerox® are
trademarks of Xerox Corporation in the US and/or other countries.
Printed in the United States of America.
***Xerox Private Data***
All service documentation is supplied to Xerox external customers for informational purposes
only. Xerox service documentation is intended for use by certified, product-trained service per-
sonnel only. Xerox does not warrant or represent that it will notify or provide to such customer
any future change to this documentation. Customer performed service of equipment, or mod-
ules, components, or parts of such equipment may affect whether Xerox is responsible to fix
machine defects under the warranty offered by Xerox with respect to such equipment. You
should consult the applicable warranty for its terms regarding customer or third-party provided
service.
While Xerox has tried to make the documentation accurate, Xerox will have no liability arising
out of any inaccuracies or omissions.
WARNING
This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions documentation, may cause inter-
ference to radio communications. It has been tested and found to comply with the limits
for a Class A computing device pursuant to subpart J of part 15 of FCC rules, which are
designed to provide reasonable protection against such interference when operated in
a commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user, at his own expense, will be required to cor-
rect the interference.
DANGER: Cet équipement génère, utilise et peut émettre des fréquences radio, et, s'il
n'est pas installé et utilisé selon les recommandations du manuel d'instructions, peut
causer des interférences aux communications radio. Il a été testé et jugé conforme aux
limites des systèmes de catégorie A, conformément à la partie 15 de l'alinéa J des règle-
ments FCC, établis pour protéger contre de telles interférences pendant le fonctionne-
ment en milieu commercial. Dans une zone résidentielle, il peut causer des
interférences; dans ce cas, l'utilisateur devra corriger le problème à ses propres frais.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
