System Overview
x
Service Manual
3-29
4. Pay attention not to overload paper. Paper overloading may cause paper jams.
5. If necessary, pinch the rear guide to adjust for the paper length and pinch the side guide and slide it to
the left flush against the paper.
3.4.4 Connecting a Printer Cable
To print from your computer, you need to connect your printer to your computer with a Universal Serial Bus (USB)
cable.
1. Make sure that both the printer and the computer are turned off.
2. Plug the USB printer cable into the connector on the back of the printer.
3. Connect the other end of the cable to the USB port on your computer.
See your computer User’s Guide if you need help.
To Next Page
Loading...
