To Next Page

To Previous Page

Service Manual

Troubleshooting

6-22

6.5.11 Ghost (3)

• Description White ghost occurs in the black image printing at 47.5mm intervals.

Digital Printer

47.5mm

Check and Cause Solution

1. The life of the developer may be expired.

2. The abnormal voltage and bad contact of

the terminal of the supply roller

1. Occur in the developer cartridge, replace

the developer and try to print out.

2. Check the approved voltage of the supply

roller and contact of the terminal and adjust

if necessary.

6.5.12 Ghost (4)

• Description Ghost occurs at 47.5mm(or 63.9mm) intervals.

Digital Printer

47.5 or 63.9mm

Check and Cause Solution

The temperature of the fuser is maintained

high.

1. Disassemble the fuser and remove the

contaminated toner particles on the roller

and clean the foreign matter between

Thermistor and Heat roller.

( Caution : can be deformed)

6.5.13 Stains on the Face of Page

• Description The background on the face of the printed page is stained.

Digital Printer

Check and Cause Solution

1. Toner leakage due to improperly sealed

developer.

2. If the transfer roller is contaminated, stains

on the face of page will occur.

1. Replace the developer cartridge.

2. If the transfer roller is contaminated, run PC

Cleaning Mode Print 2 or 3 times.

And perform Self-Test 2 or 3 times to

remove contamination.

Brand	Xerox
Model	Phaser 3117
Category	Printer
Language	English

Xerox Phaser 3117 Service Manual

Table of Contents

Other manuals for Xerox Phaser 3117

Questions and Answers:

Xerox Phaser 3117 Specifications

Related product manuals