Print
Xerox Phaser 4622
User Guide
31
Paper/Output
Use the Paper/Output tab to select the basic printing
requirements for your job. Identify the type of job
being submitted, the paper, sides printed, finishing and
quality requirements.
Note Some features are only supported by specific
printer configurations, operating systems or driver
types. You may see more features or options listed
than your specific machine supports.
Job Type
Use this option to select the type of job being submitted to the printer. Normal Print and Secure Print
job types are available on all configurations. The optional Hard Disk Drive must be installed for Sample
Set, Personal Print, Delay Print and Saved Job job types.
• Normal Print prints the job immediately without requiring a passcode.
• Secure Print is used for confidential or sensitive jobs. The job is
held at the machine until a passcode is entered to release the
job for printing.
When you select this job type, the Secure Print screen is
displayed for you to enter a unique passcode.
When the job arrives at the printer it is held in the job list until
you release the job using the same passcode entered when the
job was submitted.
Note If multiple secure jobs are held in the list and require the same secure code, they will all be
released for printing.
• Sample Set prints one copy of the job as a sample and holds the remaining copies in the job list at
the printer.
Once you have checked the sample set you can release the remaining sets for printing or delete
the job if no longer required.
• Personal Print enables you to hold all your jobs at the machine until you are ready to release and
print them. The jobs can be released individually or together. After the job is submitted a folder
will be automatically made for you. The name of the folder is your user name acquired from your
PC. You can access and manage your jobs using CentreWare Internet Services and the machine
control panel. For further information refer to Personal & Secure Jobs on page 47.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
