Xerox Phaser 6360

Loading Paper
Phaser® 6360 Color Laser Printer
3-18
5. If necessary, press the paper guides inward to fit the paper.
Note: When the paper guides are adjusted correctly, there may be a small space between
the paper and the guides.
6. Insert the tray into the tray slot, and push the tray completely into the printer.
7. To use the current tray setup, press the OK button on the control panel. If you load a new
type of paper in the tray:
a. Select
Change setup, and then press the OK button.
b. Select the paper type, and then press the OK button
See also:
Printing on Specialty Media on page 3-25
Printing Custom Size Paper on page 3-44
6360-023
6360-009
Downloaded From ManualsPrinter.com Manuals