Xerox Phaser 6500 User Manual

Printing
Phaser 6500 Color Laser Printer
User Guide
75
3. In the application you are using to print from, open the Print dialog box and select the
Phaser 6500 printer. If you have both the PCL and the PostScript drivers installed, you can use
either driver.
4. Click the Properties button.
5. In the Paper/Output tab, do the following:
a. From the Paper Size list, select the size of the glossy cardstock.
b. From the Paper Type list, select LW Gloss Card or HW Gloss Card, as appropriate.
c. From the Paper Tray list, select Manual Feed Slot.
6. Click OK and then, in the Print dialog box, click OK (or Print) to start printing.
p6500-021

Xerox Phaser 6500 Specifications

General

Monthly Duty Cycle	Up to 40, 000 pages
Duplex Printing	Manual
Print Technology	Laser
Maximum Print Resolution	600 x 600 x 4 dpi
First Page Out Time	As fast as 12 seconds
Connectivity	USB 2.0, Ethernet
Paper Capacity	250 sheets + 1 sheet bypass tray
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	Up to 24 ppm (color) / Up to 24 ppm (black)