How to fix an error message after loading paper in paper Tray 5 (Bypass) on Xerox PrimeLink B9125 Printer?
If you receive an error message after loading paper in paper Tray 5 (Bypass) and pressing the Start button, make sure that the paper guides at the front side of paper Tray 5 (Bypass) are set to the correct positions.
Why does a stripe pattern appear in copies from my Xerox PrimeLink B9125?
If a stripe pattern appears in copies from your Xerox Printer, the document enlargement ratio is likely set too large. Some enlargement ratios can cause stripes, so try adjusting the copy enlargement ratio.
Why does the printed toner smudge when rubbed on my Xerox prints?
If the printed toner smudges when rubbed on your Xerox prints, it could be due to a couple of reasons. The paper might be damp, so try replacing it with paper from a new ream. Alternatively, the paper you're using might be unsuitable; try loading suitable paper.
Why does the text print incorrectly or get corrupted on my Xerox PrimeLink B9125?
If text prints incorrectly or gets corrupted on your Xerox Printer, non-standard fonts might be used for printing. Check the application or print driver settings to ensure standard fonts are selected.
Why am I unable to send email from my Xerox PrimeLink B9125 Printer?
If you are unable to send email from your Xerox Printer, verify that the email address is correct. Also, the maximum sending email size might be exceeded; change the maximum sending email size, or reduce the resolution.
Why are text or images printed at an angle from my Xerox PrimeLink B9125 Printer?
If text or images are printed at an angle from your Xerox Printer, the paper guide in the paper tray is not set at the correct position. Set the horizontal and vertical paper guides to the correct positions.
How to lighten a Xerox PrimeLink B9125 copy that is too dark?
If your Xerox Printer copies are coming out too dark, the copy density is likely set too high. Adjust the copy density to a lighter setting.
Why does my Xerox PrimeLink B9125 Printer copy with black lines?
If your Xerox Printer is producing copies with black lines, the document glass on the feeder is likely dirty. Clean the document glass to resolve this issue.
Why is my Xerox PrimeLink B9125 Printer making dirty copies?
If copies from your Xerox Printer appear dirty, the issue might stem from a few sources. The document glass or the document cover could be dirty, so try cleaning them. If you're copying a highly transparent document, like a transparency, it could be picking up marks from the document cover; place a white sheet of paper on top of the document before copying. If the document is colored, has a rough texture, or is a blueprint, try adjusting the copy density or image quality. If you are using glossy printing paper, place a transparency or highly transparent film under the document.
What to do if my Xerox PrimeLink B9125 Printer is unable to print or copy?
If your Xerox Printer is unable to print or copy, here are a few things to check: First, see if there's a message on the control panel and follow the instructions provided. Second, make sure the printer isn't in offline mode by pressing the Machine Status button and selecting Online. Finally, ensure the power cord is properly connected to both the printer and the power outlet; if disconnected, turn the power off, plug it in securely, and then turn the power back on.
General instructions for safe printer operation and compliance with safety agency evaluations.
Guidelines for safe electrical connections, power cords, and emergency power off procedures.
Safe practices during printer operation, handling hot areas, and environmental considerations.
Information about Class 1 laser safety standards for North America and the European Union.
Procedures for printing documents over a network using PostScript and PCL drivers.
Step-by-step guide for making copies using the automatic document feeder.
Instructions for making copies using the document glass.
Explains various scan methods like Email, Network Scanning, Scan to PC, and Store to USB.
Step-by-step guide for sending faxes using the multifunction printer's embedded fax.
Instructions for sending faxes via email by scanning the document.
Step-by-step guide on how to register and store a program with custom settings.
General guidelines for loading, printing, and storing various types of media, including labels and glossy paper.
Procedures for cleaning the printer's exterior, touch screen, document glass, and feeder rollers.
Instructions for checking and replacing consumable supplies like toner cartridges and waste containers.
Addresses common printer issues such as no power, dark display, and unable to print.
Solutions for common image quality problems like dirty copies, skewed images, and incorrect sizing.
Instructions for clearing paper jams in various locations within the printer and feeders.
Instructions for loading paper and special media into the Standard and XLS Bypass trays.
Step-by-step guide on how to load paper into the HCF trays and adjust paper guides.
Instructions for loading paper and special media into the OHCF trays.
To Next Page
General