Why do white areas or stripes appear on my Xerox PrimeLink B9125 Printer?
If white areas or stripes appear on your Xerox Printer, the paper may be damp; replace with paper from a new ream. Alternatively, the paper in use may be unsuitable; load suitable paper.
Why is the printing faint on the entire page from my Xerox PrimeLink B9125?
If the printing is faint on the entire page from your Xerox Printer, the print was made using Tray 5 (Bypass), and the size and type of the loaded paper differed from the setting on the print driver. Load paper of the correct size and type into Bypass, Tray 5. Fan the paper thoroughly before you load it. Alternatively, two or more sheets may be feeding at the same time; fan the paper thoroughly, then reset the paper.
Why does paper become wrinkled when using my Xerox PrimeLink B9125 Printer?
If paper becomes wrinkled when using your Xerox Printer, the paper in use may be unsuitable; replace with paper from a new ream.
How to fix Xerox PrimeLink B9125 when copies are not the correct size?
If your Xerox Printer isn't producing copies at the required size, consider these potential causes: The document scanning glass or the document cover might be dirty, so clean them. If the document is made of highly transparent material, place it on the document glass with a white sheet of paper on top. Ensure the document is loaded correctly and the document guides are properly positioned. If the document is folded or bent, straighten it before reloading. For non-standard sized documents, enter the document size on the control panel.
Why are documents jamming so often in my Xerox Printer?
Frequent document jams in your Xerox Printer can be caused by several issues. Make sure you're using the right type of paper or media and that it’s loaded properly in the document feeder. Remove any sticky labels, paper clips, or adhesive tape from the documents before copying. Ensure the document guides are correctly positioned. If a piece of paper is torn, open the document feeder cover and check for any remaining pieces. Also, if you're copying originals of different sizes, make sure the Mixed Size Originals setting is turned ON.
How to brighten the display on a Xerox PrimeLink B9125?
If the display on your Xerox Printer is dark, it could be due to a couple of reasons. The printer might be in power saver mode; press the Power Saver button on the control panel to cancel it. Alternatively, the brightness dial might be set too low; adjust it to increase the display brightness.
What does it mean when the Xerox PrimeLink B9125 Printer online indicator is lit, but copies are not delivered?
If the online indicator is lit on your Xerox Printer but copies are not being delivered, it's possible that data remains in the printer memory. Try canceling the current printing job or purging any remaining data.
General instructions for safe printer operation and compliance with safety agency evaluations.
Guidelines for safe electrical connections, power cords, and emergency power off procedures.
Safe practices during printer operation, handling hot areas, and environmental considerations.
Information about Class 1 laser safety standards for North America and the European Union.
Procedures for printing documents over a network using PostScript and PCL drivers.
Step-by-step guide for making copies using the automatic document feeder.
Instructions for making copies using the document glass.
Explains various scan methods like Email, Network Scanning, Scan to PC, and Store to USB.
Step-by-step guide for sending faxes using the multifunction printer's embedded fax.
Instructions for sending faxes via email by scanning the document.
Step-by-step guide on how to register and store a program with custom settings.
General guidelines for loading, printing, and storing various types of media, including labels and glossy paper.
Procedures for cleaning the printer's exterior, touch screen, document glass, and feeder rollers.
Instructions for checking and replacing consumable supplies like toner cartridges and waste containers.
Addresses common printer issues such as no power, dark display, and unable to print.
Solutions for common image quality problems like dirty copies, skewed images, and incorrect sizing.
Instructions for clearing paper jams in various locations within the printer and feeders.
Instructions for loading paper and special media into the Standard and XLS Bypass trays.
Step-by-step guide on how to load paper into the HCF trays and adjust paper guides.
Instructions for loading paper and special media into the OHCF trays.
To Next Page
General