Why do white dots appear in black filled areas when printing with my Xerox PrimeLink B9136 Printer?
If white dots appear in black filled areas when printing with your Xerox Printer, the paper you are using might be unsuitable. Try loading suitable paper.
Why is the entire paper area printed black on my Xerox PrimeLink B9136?
If the entire paper area is printed black on your Xerox Printer, the drum cartridge may be depleted or damaged, or there may be a high-voltage power supply malfunction. Contact Xerox Technical Customer Support.
Why do white patches appear vertically on my Xerox Printer output?
If white patches appear vertically on your Xerox Printer output, the drum cartridge may be depleted or damaged. Contact Xerox Technical Customer Support.
Why are text or images printed at an angle from my Xerox PrimeLink B9136 Printer?
If text or images are printed at an angle from your Xerox Printer, the paper guide in the paper tray is not set at the correct position. Set the horizontal and vertical paper guides to the correct positions.
Why is the printing faint, smudged, or unclear on my Xerox Printer?
If the printing is faint, smudged, or unclear on your Xerox Printer, the paper may be damp. Replace with paper from a new ream. If the issue persists, contact Xerox Technical Customer Support, as the drum cartridge may be depleted or damaged.
Why does my Xerox PrimeLink B9136 keep jamming and wrinkling paper?
Frequent paper jams and wrinkled paper in your Xerox Printer can be due to several factors: * The paper might not be loaded correctly in the paper tray; ensure it's loaded properly. * The paper tray might not be fully inserted; push it in firmly as far as it can go. * The paper could be damp; replace it with paper from a new ream. * The paper could be curled; try turning the paper over so the curl faces down, or use a new ream.
What to do if my Xerox PrimeLink B9136 Printer is unable to print or copy?
If your Xerox Printer is unable to print or copy, here are a few things to check: First, see if there's a message on the control panel and follow the instructions provided. Second, make sure the printer isn't in offline mode by pressing the Machine Status button and selecting Online. Finally, ensure the power cord is properly connected to both the printer and the power outlet; if disconnected, turn the power off, plug it in securely, and then turn the power back on.
Why is my Xerox PrimeLink B9136 making dirty copies?
If copies from your Xerox Printer appear dirty, the issue might stem from a few sources. The document glass or the document cover could be dirty, so try cleaning them. If you're copying a highly transparent document, like a transparency, it could be picking up marks from the document cover; place a white sheet of paper on top of the document before copying. If the document is colored, has a rough texture, or is a blueprint, try adjusting the copy density or image quality. If you are using glossy printing paper, place a transparency or highly transparent film under the document.
Why does my Xerox Printer copy with black lines?
If your Xerox Printer is producing copies with black lines, the document glass on the feeder is likely dirty. Clean the document glass to resolve this issue.
How to lighten a Xerox Printer copy that is too dark?
If your Xerox Printer copies are coming out too dark, the copy density is likely set too high. Adjust the copy density to a lighter setting.
General| Print Speed (Black) | 136 ppm |
|---|---|
| Print Resolution | 1200 x 2400 dpi |
| Memory (Standard) | 8 GB |
| Hard Drive | 250 GB |
| Operating System Compatibility | Windows, macOS, Linux |
| Type | Multifunction Printer |
| Copy Speed (Black/White) | 136 cpm |
| Fax Modem Speed | 33.6 Kbps |
| Paper Size (Maximum) | 13 x 19.2 inches |
| Processor | 1.8 GHz |
| Connectivity | USB, Ethernet, Wi-Fi |
| Scanner Type | Duplex Automatic Document Feeder |
| Duplex Printing | Automatic |
To Next Page