3. To move out the length or width paper guides, pinch the guide locks, then slide out the length or width paper
guides.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface. The
procedure separates any sheets that are stuck together and reduces the possibility of jams.
WWaarrnniinngg:: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
5. Load the paper in the tray. For short-edge feed, insert letterhead and pre-printed paper face up with the top
edge toward the front.
Long-edge feed is the recommended orientation for A5 (148 x 210 mm, 5.8 x 8.3 in.) paper.
WWaarrnniinngg:: Do not load the paper above the maximum fill line. Overfilling the tray can cause paper jams.
146
Xerox
®
VersaLink
®
B620 Printer User Guide
Paper and Media