5. Close the bypass tray.
6. Connect the power cord to the power supply, then power on the printer.
CCaauuttiioonn:: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated
and properly grounded electrical outlet that is near the product and easily accessible.
Separator Pad
RReeppllaacciinngg tthhee SSeeppaarraattoorr PPaadd
To replace the separator pad:
1. Pull out any standard paper tray from the printer.
2. To remove the separator pad, do the following:
Xerox
®
VersaLink
®
B620 Printer User Guide 175
Maintenance
To Next Page
Loading...
