Regulatory Information
Xerox
®
VersaLink
®
C400 Color Printer 183
User Guide
To save power, you can enable Auto Power Off mode on your device. If Auto Power Off mode is enabled,
you can configure the mode as follows:
• Always Allowed: The device powers off automatically after the specified time, and the cumulative
Low Power mode and Sleep mode timeouts have elapsed.
• Allowed ONLY When Conditions are Met: The device automatically powers off only after timeouts
have elapsed. The device also powers off if Fax, USB Drive, and Wired and Non-Wired Network have
not been activated.
To change the Power Saver settings, refer to the
User Guide
at www.xerox.com/office/VLC400docs.
For further assistance, contact your System Administrator or refer to the
System Administrator Guide
.
To enable Auto Power Off mode, contact your System Administrator. For details, refer to the
System
Administrator Guide
at www.xerox.com/office/VLC400docs.
To learn more about Xerox participation in sustainability initiatives, go to:
www.xerox.com/about-xerox/environment/enus.html.
Note: Changing the default Power Saver activation times can result in an overall higher energy
consumption of the device. Before you turn off Power Saver modes or set a long activation time,
consider the increase in device power consumption.
Default Power Saver Settings
This device is ENERGY STAR
®
-qualified under the ENERGY STAR Program Requirements for Imaging
Equipment. The transition time from Ready mode to Low-Power mode can be set up to 60 minutes.
The default value is 10 minutes. The transition time from Low-Power mode to Sleep mode can be set
up to 60 minutes. The default value is set at 1 minute. The total transition time from Ready mode to
Sleep mode can take up to 60 minutes.
To change the Power Saver settings, contact your system administrator or refer to
System Administrator
Guide
at www.xerox.com/office/VLC400docs.
Environmental Choice Certified to Office Machines CCD-035
This product is certified to Environmental Choice standard for office
machines, meeting all requirements for reduced environmental impact.
As part of achieving certification, Xerox Corporation has proven this product
meets the Environmental Choice criteria for energy efficiency. Certified
copier, printer, multifunctional device, and fax products must also meet
criteria such as reduced chemical emissions and demonstrate compatibility
with recycled supplies. Environmental Choice was established in 1988 to help
consumers find products and services with reduced environmental impacts.
Environmental Choice is a voluntary, multi-attribute, and lifecycle-based
environmental certification. This certification indicates that a product has
undergone rigorous scientific testing, exhaustive auditing, or both, to prove its
compliance with stringent, third-party, environmental performance standards.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
