Configuring Tray Settings
The system administrator can set Trays 1–4 of all configurations to Fully Adjustable mode or
Dedicated mode. When a paper tray is set to Fully Adjustable mode, you can change paper settings
each time that you load the tray. When a paper tray is set to Dedicated mode, the control panel
prompts you to load a specific paper size, type, and color.
Note: To configure tray settings, log in as the system administrator. For details, refer to the
System Administrator Guide at www.xerox.com/office/VLC7000docs.
To configure the tray settings:
1. At the printer control panel, touch Device.
2. Touch Paper Trays, then select the required tray.
• To set the mode, touch Tray Mode, then select an option.
• To specify the paper settings for a dedicated tray, ensure that Tray Mode is set to Dedicated,
then set the paper size, type, and color.
• To configure the printer to select the tray automatically, touch the Auto Select toggle button.
• To set the priority for each tray, touch the Plus icon (+) or the Minus icon ( -). The printer uses
paper from the Priority 1 tray first. If that tray is empty, the printer uses paper from the
Priority 2 tray.
3. Touch OK.
4. To return to the home screen, press the Home button.
Xerox
®
VersaLink
®
C7000 Color Printer
User Guide
109
Paper and Media
To Next Page
Loading...
Need help?
General