Xerox Versant 2100 Press - Clearing Jams in Bypass Tray

Paper Jams in the Bypass (Tray 5)
Tip
Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared
before proceeding with any print jobs.
1. Remove the paper currently loaded in the Bypass Tray.
2. Lift and open the Cover Tray located near the entrance of the press and remove any
jammed paper.
3. Close the tray cover.
Note
If paper is torn, check inside the press and remove it.
4. Reload paper into the tray and resume printing.
Xerox
®
Versant™ 2100 Press6-10
Quick Start Guide
Paper Jams