Xerox Versant 2100 Press User Manual (English)

Other manuals for Xerox Versant 2100 Press

Quick Start Guide68 pages

System Administration Guide104 pages

Security Guide45 pages

Questions and Answers:

T
Thomas Pratt Jr.Aug 11, 2025
How to troubleshoot automatic registration failure on Xerox Printer during first install?
- C
  Charles CrawfordAug 11, 2025
  To troubleshoot automatic registration failure on a Xerox Printer during the initial installation: * Verify that WPAD Option 252 is enabled on the proxy server, and confirm the settings. WPAD allows network clients to locate a configuration file URL using DHCP and/or DNS discovery methods. * If WPAD is not an option, manually enter the proxy server IP address in the web browser. * Ensure you have the correct username and password for proxy authentication, and enter this information in the web browser. * Check the IP address exclusion settings on the network configuration.
D
davischristopherAug 15, 2025
How to check DNS settings on Xerox Versant 2100 Press Printer?
- K
  Kevin MorrisAug 15, 2025
  To check the DNS settings on your Xerox printer, use a PC running Windows on the same subnet as the printer. Open a command prompt (Start > Run, then type cmd). Enter the command ipconfig/all to display the IP configuration information. Note the Connection-specific DNS Suffix (domain name) and the DNS Servers IP address. To verify connectivity, type ping followed by the IP address of the DNS server; you should receive a reply. Also, type ping followed by the IP address of the default gateway to verify connectivity with the default router; a reply should also be received. Finally, check that the DNS Server and Default Gateway settings are correctly configured on the printer.
R
rayjasonAug 20, 2025
What to do if proxy server settings are incorrect on Xerox Versant 2100 Press Printer?
- K
  Kaitlyn EdwardsAug 21, 2025
  If the proxy server settings are incorrect on your Xerox printer, consult your network administrator for the correct proxy server details. Then, enter these details in the Network Connectivity Setup area of the printer.
Q
qfernandezAug 26, 2025
Why am I getting transmission errors using the EFI Print Server configuration on Xerox Printer?
- A
  andreaburnsAug 26, 2025
  If you are experiencing transmission errors using the EFI Print Server configuration on your Xerox printer, make sure the DNS Server Information is configured. Configure the print server with a DNS server name, even if you have to test with a false name. Also, configure Dynamic DNS on the printer.

Xerox Versant 2100 Press Specifications

General

Max Print Resolution	2400 x 2400 dpi
Media Weight Range	52 - 350 gsm
Two-sided Printing	Automatic
Memory	4 GB
Operating Systems Supported	Windows, macOS, Linux
Power Consumption (standby)	100 W
Print Speed	100 ppm (pages per minute)
Color	Yes
Supported Media Types	Plain, coated, glossy, bond, recycled, label, cardstock, envelopes
Connectivity	Ethernet, USB, Wi-Fi
Power Requirements	200-240 V, 50/60 Hz
Line Screens	150 - 300 lpi