Xerox Versant 2100 Press - Power Management Features

Detailed Specifications Xerox
®
Versant™ 2100 Press
Customer Expectation and Installation Guide Xerox Confidential 4
2 Detailed Specifications
Product Specifications
All references to media capacity are based on the Xerox Centerline Paper.
Centerline Paper identifies the stock at the middle of the range of stocks
that will deliver optimum performance for a given characteristic. Other
paper weights and brands may alter performance (for example, paper tray
capacities).
Media Type Xerox Versant 2100 Press Centerline Paper
Uncoated paper North America - Xerox Color Xpressions Plus
(90 gsm/24 lb.)
Europe – Xerox Colotech+ (90 gsm/24 lb.)
Coated paper North America - Xerox Digital Color Elite Gloss
(120 gsm/80 lb.)
Europe - Xerox Digital Color Elite Gloss
(120 gsm/80 lb.)
System Specifications
Print Speed and
Monthly Volume
Xerox Versant 2100 Press
Print Speed Up to 100 ppm (52 – 300 gsm)
Up to 80 ppm (301 – 350 gsm)
Recommended
Average Monthly
Print Volume
1
75,000 to 250,000 pages
Maximum Monthly
Duty Cycle
2
Up to 660,000 pages
1 The Average Monthly Print Volume is the expected regular monthly
throughput for 8.5x11/A4 paper.
2 The Monthly Duty Cycle is the maximum volume capacity expected in any
one month. This volume us supported under standard vendor supplied
service for any single month but is not expected to be sustained on a
regular basis. Customers should consider higher volume machines or
multiple machines if average monthly volume approaches the maximum
duty cycle on a continual basis.
NOTE: Refer to the following for more detailed specification information:
Feature Specifications, Print Engine Productivity Charts, and Feeding from
the Bypass Tray 5.
The press is designed to operate in the range of 75,000 – 250,000 prints per
month. At an average usage of 100,000 prints per month using centerline
paper, it is expected that service will be required about once every 3.5
weeks. Prints between service calls on a digital color press depend upon
individual customer requirements for quality, volume, applications, and
throughput material. Generally, customers who participate in formal operator
training from Xerox experience better performance, improved productivity,
and reduced service activity.
The recommended maximum Black-only (K-only) volume is 20% of total
monthly volume, or up to 20,000 K-only AMIV.
Service Rates Xerox Versant 2100 Press
Service Call Approximately
one call every 3.5
weeks.
At ave
r
age usage o
f
100,000 prints
per month on centerline paper.
Actual service call rate is influenced
by total print volume, environmental
conditions, area cover- age, and
media characteristics.
Shutdown
Rate
On ave
r
age, less
than 1 fault per
week requiring a
power-recycle to
recover.
Based on 100,000 AMPV, one
8-hour
shift per day, using centerline papers.
Customers will also achieve improved system uptime and elimination of
certain service calls through the Technical Key Operator Replaceable Units
(TKORU) program. TKORU is a self-maintenance program that will enable
trained operators to replace certain parts (Fuser Belt Module, Pressure Roll,
Stripper Finger Assembly, and Pressure Roll Cleaning Pad) and perform
other service and diagnostic tasks. The TKORU program will provide supplies,
documentation, and Technical Key Operator training, which will be scheduled
with the Xerox Customer Service Engineer or Analyst at or shortly after
installation. Following the initial TKORU training, if the customer requires
additional people to be trained it may be chargeable or the service pricing
maybe adjusted. If the customer fails to perform the TKORU maintenance
tasks, the service entity will be able to charge the customer for the service
labor performing these tasks.
Technology
Full Width Array
The Full Width Array provides a way for the user to perform some common
image quality management tasks. The Full Width Array procedures must
be initiated by an operator at either the Print Server (FreeFlow Print Server
or EFI Fiery) or at the machine's control panel/touch screen. All target
sheets are then generated and scanned automatically, and all
measurements, calculations, and corrections are performed automatically.
For several of the Full Width Array processes, manual inspection of a
confirmation print is required. The Full Width Array does not monitor or
make adjustments within a print job.
Refer to Full Width Array Expectations for detailed information on the Full
Width Array procedures.
Stock Lib
r
ary Manager
The Stock Library Manager application:
 Is conveniently located on the Print Server (EFI Fiery and FreeFlow Print
Server)
 Provides the integrated Xerox Recommended Media List to simplify
stock creation
 Allows the user to create and save custom stock profiles
 Provides expert-level control over a variety of features such as fuser
temperature, roller pressures, and more
 Is fully integrated with the Xerox print servers to make stock
management simple and fast
Other Technologies:
 Ultra HD Resolution for extremely fine details from rendering and
VCSEL ROS technologies
 Production Accurate Registration (PAR) for consistent front-to-back
registration
 Full Width Array featuring the Automated Color Quality Suite (ACQS)
 Closed-loop color process controls
 Xerox
®
EA Low Melt Dry Ink
 Bias Charge Rolls with auto cleaning technology
 Compact Belt Fuser technology
 Customizable Electronic Aligner Adjustments (profiles)
 Inline paper cooling module
 Single Pass Decurler (belt and roll technology/optimal sheet flatness)
 Long life photoreceptors
 Modular feeding and finishing
 Advanced Customer Care Design
Connectivity
Refer to Print Server Network Specification
s
section.