Detailed Specifications Xerox
®
Versant™ 2100 Press
Customer Expectation and Installation Guide Xerox Confidential 16
High Capacity Stacker (HCS) Tray
The HCS is designed for long production runs.
Up to 5,000 sheets offsetting output stack tray with movable cart to move to off line finishing.
500 sheet top tray
Sample Prints are additional prints directed to the top tray for inspection. Samples are not produced by redirecting sheets from the Stack to the Top Tray;
therefore the contents in the Stack Tray are complete.
HCS
Specifications
Feature Specification (with centerline paper)
Stacker Tray Capacity 5,000 sheets
Top Tray Capacity 500 sheets
Maximum Stack Weight 70KG (154 lbs.)
Maximum Paper Size 330mm x 488mm (13 x 19.2)
Power requirement Refer to Electrical Requirements for
Optional Devices
or in
ormation.
HCS
Limitations
The HCS is subject to stack weight limitations, and settings have been implemented to prevent damage to the unit caused by an
excessively heavy stack. Please refer to this chart for approximate stack sizes for sheets larger than 8.5 x 11 in./A4.
Stack quality may degrade and jams may increase with 64-106gsm coated paper stocks
Mixed stock sizes can be sent to the HCS. However, the HCS generally should be unloaded between jobs that utilize different stock sizes to
prevent stack quality problems such as paper misalignment or stack integrity.
Two or more stackers may be chained together.
Stacker Tray Specifications
Stacker Tray Capacity by weight and paper finish
Paper type and weight Paper Size
Smallest size
203 x 182 Min
A4 /
8.5 x 11 in.
B4
/
8.5 x 14 in.
A3
/
11 x 17 in.
12 x 18 in. SRA3
13 x 19.2 in.
Uncoated
52-350 gsm
Sheets < 5,000 < 5,000
< 2,300
< 2,300
< 2,300 < 2,300
< 2,300
Stack Height H < 570mm
(22.44 in)
H < 570mm
(22.44 in)
H < 460mm
(<18.11 in)
H < 460mm
(<18.11 in)
H < 460mm
(<18.11 in)
H < 460mm
(<18.11 in)
H < 460mm
(<18.11 in)
Coated
64-350 gsm
Sheets < 5,000 < 5,000
< 3,400
< 3,400
< 3,400 < 3,400
< 3,400
Stack Height H < 570mm
(22.44 in)
H < 570mm
(22.44 in)
H < 412mm
(<16.22 in)
H < 412mm
(<16.22 in)
H < 412mm
(<16.22 in)
H < 412mm
(<16.22 in)
H < 412mm
(<16.22 in)
Standard Finisher
The Standard Finisher is an output device that can perform up to 100-sheets stapling, up to 3,000 sheets stacking, punch, saddle stapling/center-fold, optional
C/Z-fold/three-fold, and cover paper insertion.
The Standard Finisher has a built-in interposer (Tray T1 or 8 depending on your product) that feeds cover paper to the finisher for stapled sets. Other than the
Top Tray, the Standard Finisher does not support the full paper weight range that can be printed on the press. Refer to Standard Finisher Specifications for
details on the media that is supported.
Standard Finisher Specifications
Top Tray
Standard Finisher Top Tray Capacity by weight and paper finish
Paper type and weight Paper Size
Post Card
182x257 mm
A4 /
8.5 x 11 in.
B4
/
8.5 x 14 in.
A3
/
11 x 17 in.
12 x 18 in.* SRA3*
13 x 19.2 in.*
Uncoated 52-80 gsm H=67mm
(2.64 in.)
500
500
500
500 500
500
80-350 gsm H=67mm
(2.64 in.)
H=67mm
(2.64in.)
H=67mm
(2.64 in.)
H=67mm
(2.64 in.)
H=67mm
(2.64 in.)
H=67mm
(2.64 in.)
H=67mm
(2.64 in.)
Coated 106-350 gsm H=67mm
(2.64 in.)
H=67mm
(2.64 in.)
H=67mm
(2.64 in.)
H=67 mm
(2.64 in.)
H=67mm
(2.64 in.)
H=67 mm
(2.64 in.)
H=67mm
(2.64 in.)
*Cannot be offset
Stacker Tray
Standard Finisher Stacker Tray Capacity by weight and paper finish
Paper type and weight Paper Size
B5 /
182 x 257 mm
A4 /
8.5 x 11 in.
B4
/
8.5 x 14 in.
A3
/
11 x 17 in.
12 x 18 in.* SRA3*
13 x 19.2 in.*
Uncoated 52-80 gsm 1,500
3,000
1,500
1,500
1,500 1,500
1,500
80-300 gsm H=180 mm
(7.09 in.)
H=378 mm
(14.88 in.)
H=180
mm (7.09 in.)
H=180
mm (7.09 in.)
H=180
mm (7.09 in.)
H=180 mm
(7.09 in.)
H=180 mm
(7.09 in.)
Coated 106-300 gsm H=180 mm
(7.09 in.)
H=378 mm
(14.88 in.)
H=180 mm
(7.09 in.)
H=180 mm
(7.09 in.)
H=180 mm
(7.09 in.)
H=180 mm
(7.09 in.)
H=180 mm
(7.09 in.)
*Cannot be offset, 301-350 gsm media cannot be sent to the Stacker Tray (accepted in Top Tray only)
To Next Page
Loading...
