Xerox Versant 4100 Press - Loading Paper in Tray 5 (Bypass)

6. Load and align the edge of the paper against the right edge of the tray.
Paper can be loaded in the LEF or portrait, or SEF or landscape direction.
7. Adjust the paper guides by pressing in the guide releases and carefully moving the guides until
they lightly touch the edges of the material in the tray.
Note: Do not load materials above the MAX line located on the guides.
8. Gently push in the tray until it comes to a stop.
The Stock Wizard opens on the print server.
9. Scan the barcode on the stock, then to set up the stock, follow the steps in the Stock Wizard.
LLooaaddiinngg PPaappeerr iinn TTrraayy 55 ((BByyppaassss))
1. Slide the paper guides outward to the desired paper size.
2. Select the appropriate paper stock for your print job.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Insert the paper or media into the tray until it stops.
The Stock Wizard opens on the print server.
14
Xerox
®
Versant
®
4100 Press
Quick Start Guide
Paper and Media