Power On or Off the Press
1. To switch on the press, check that the Main Power switch behind the Center Front Door is On.
2. Press the Power button on top of the press to the ON position.
The Ready Indicator light displays green.
A screen message advises of a short wait while the fuser warms up and the press runs a system
check. You can set features for a job during this time and the printing process will start
automatically when the press is ready.
3. To switch off, press the Power button to the Off position.
Note: Allow the press to remain off for a minimum of 10 seconds before switching on the
power again.
Xerox
®
Versant
®
4100 Press
Quick Start Guide
9
Getting Started
To Next Page
Loading...
