b. Close the tray and verify the tray settings from the PredictPrint Media Manager application
on the print server.
c. Run your print job.
10. Retrieve and evaluate the printed output; choose one of the following actions:
• If the paper is fed accurately without skew and the printed output is satisfactory, perform the
following:
1. Open the tray.
2. Return the right-side paper-feed adjustment lever to its default position by sliding it
toward the front of the tray.
3. To complete the task, close the tray.
• If the paper is skewed and the printed output is unsatisfactory, proceed to the next step.
11. Adjust both levers:
a. Open the tray and slide the rear paper-feed adjustment lever to the right.
Xerox
®
Versant
®
4100 Press
Quick Start Guide
19
Paper and Media
To Next Page
Loading...
