TTrraayyss 66 aanndd 77 PPaappeerr JJaammss aatt LLeevveerr 11bb aanndd KKnnoobb 11cc
1. Open the front cover of the feeder module.
2. Move the lever 1b to the right and turn the knob 1c to the right. Remove the jammed paper.
Note: If paper is torn, check for any torn pieces of paper inside the machine.
3. Return the lever 1b to the original position.
4. Close the front cover of the feeder module.
Note: If the front cover of the feeder module is not completely closed, a message will
appear and the press will not operate.
60
Xerox
®
Versant
®
4100 Press
Quick Start Guide
Troubleshooting
To Next Page
Loading...
