Xerox WorkCentre 5016 User Manual

Cleaning the Machine
Xerox WorkCentre 5016/5020 User Guide 118
2. Turn the Document Feeder Roller to
clean it with a soft cloth moistened with
water.
Important • Do not use cleaning agents other
than water or neutral detergent.
• Use a firmly wrung cloth to avoid
water drops from falling onto the
machine. If water gets into the
machine, it may cause the machine
malfunction.
Note • If dirt does not come off easily,
gently wipe it with a soft cloth moistened with a small amount of neutral detergent.
3. Close the Document Feeder Cover until it clicks into place.
Cleaning the Corotron Wire
If any streaks, black lines, or smears appear on the output copies, cleaning the
Corotron Wire may help resolve the problem. The following procedure describes how
to clean the Corotron Wire.
1. Open the Front Cover.
2. Pull the Corotron Wire back and forth
several times.
3. Close the Front Cover.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 5016 Specifications

General

Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Manual
Functions	Copy, Print, Scan
Print Technology	Laser
Print Speed	16 ppm
Copy Speed	16 cpm
Scan Type	Flatbed
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	10, 000 pages
Operating System Compatibility	Windows, Mac, Linux