Xerox WorkCentre 5016 User Manual

Changing the Size and Orientation of Paper in the Trays
Xerox WorkCentre 5016/5020 User Guide 48
Changing the Size and Orientation of Paper in Tray 2
The following procedure describes how to change the size and orientation of paper in
Tray 2.
1. Pull out Tray 2 towards you.
Note • While the machine processes a
job, do not pull out the tray in use.
2. Remove the remaining paper.
3. Slide paper guides towards the front
and back of the tray.
4. Slide the paper guide to the right.
5. Load a new stack of paper neatly and
tightly against the left corner of the tray
with the side to be printed facing up.
Important • Do not load mixed types or mixed
sizes of paper together in Tray 2.
• Do not load paper above the
maximum fill line. It may cause
paper jams or machine
malfunctions.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 5016 Specifications

General

Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Manual
Functions	Copy, Print, Scan
Print Technology	Laser
Print Speed	16 ppm
Copy Speed	16 cpm
Scan Type	Flatbed
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	10, 000 pages
Operating System Compatibility	Windows, Mac, Linux