Loading Documents
Xerox WorkCentre 5016/5020 User Guide 55
Loading Documents
When loading an original document to copy, you can place it on the Document Glass,
or load it in the Document Feeder. This section describes how to place documents on
the Document Glass and in the Document Feeder. Information is also given on the
paper capacity and the supported paper types for the Document Glass and the
Document Feeder.
Document Glass
The Document Glass supports a single sheet, a book, and other similar types of original
documents in sizes up to 297 x 432 mm. The machine does not automatically detect
the size of the original document that is placed on the Document Glass.
Important • Close the Document Cover while scanning a document on the Document Glass. Do not
leave the Document Cover open when not in use.
1.
Open the Document Cover.
2.
Place the document face down on the
Document Glass, and align it with the
top left corner.
Note • If the size of the loaded document
is smaller than any standard sizes,
the edges of the loaded document
may create shadow, and may
appear to have an outline on the
copied output.
3.
Close the Document Cover.
LEF orientation
SEF orientation
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
